GesslerEZF WIKIKNOWLEDGE HUB
PLDEEN

Controller: clock, date and NTP

CONTROLLER SETTINGS · STEP BY STEP

Controller: clock, date and NTP

480 × 320 display screens in the selected language. The yellow outline marks where to tap. Illustrated data is for demonstration.

Display interface
Before you start

Have your own PIN and a working LAN or Wi-Fi client connection to the time server ready. Choose the correction and manual Summer time mode before enabling NTP. Controller access codes →

  1. EZF480 × 320 · Classic
    Step 1: Open MENU
    1Step 1 / 12

    Open MENU

    On the home screen, tap MENU in the upper right. If prompted, enter your own PIN and confirm with OK. Controller access codes →

  2. EZF480 × 320 · Classic
    Step 2: Open the second menu page
    2Step 2 / 12

    Open the second menu page

    Tap the right arrow in the top bar.

  3. EZF480 × 320 · Classic
    Step 3: Choose “Settings”
    3Step 3 / 12

    Choose “Settings”

    On the second menu page, tap Settings in the lower left.

  4. EZF480 × 320 · Classic
    Step 4: Open “RTC clock”
    4Step 4 / 12

    Open “RTC clock”

    Tap RTC clock in the lower left. Time, Date and NTP each have their own settings screen.

  5. EZF480 × 320 · Classic
    Step 5: Open NTP
    5Step 5 / 12

    Open NTP

    Tap the NTP tile in the upper right.

  6. EZF480 × 320 · Classic
    Step 6: Start with synchronization off
    6Step 6 / 12

    Start with synchronization off

    Before choosing the correction, make the NTP synchronization square empty. If it is green, tap it once to switch synchronization off. Set the correction and summer mode first, then enable synchronization.

  7. EZF480 × 320 · Classic
    Step 7: Choose the time correction
    7Step 7 / 12

    Choose the time correction

    Tap one value from −5h to +5h. The selected value has a blue background. For Poland and Germany, the standard correction is +1h; the additional summer hour is selected separately below.

  8. EZF480 × 320 · Classic
    Step 8: Set “Summer time mode”
    8Step 8 / 12

    Set “Summer time mode”

    The Summer time mode square toggles an additional hour. Solid green means +1 hour; an outline means no addition. Choose the state appropriate for the current local time. This screen provides a manual switch, not an automatic daylight-saving calendar.

  9. EZF480 × 320 · Classic
    Step 9: Enable NTP synchronization
    9Step 9 / 12

    Enable NTP synchronization

    After setting the correction and summer mode, tap the empty NTP synchronization square. It should become solid green, as shown.

  10. EZF480 × 320 · Classic
    Step 10: Leave with the back arrow and check the result
    10Step 10 / 12

    Leave with the back arrow and check the result

    Tap the left arrow. The settings are saved and a time update is requested. Return with the home icon and check the time and date. A working LAN or Wi-Fi client connection to the time server is required.

  11. EZF480 × 320 · Classic
    Step 11: Return to the home screen
    11Step 11 / 12

    Return to the home screen

    After saving, tap the home icon in the upper right.

  12. EZF480 × 320 · Classic
    Step 12: Verify the local time
    12Step 12 / 12

    Verify the local time

    If the time is incorrect, check the network connection, correction and Summer time mode. After changing the correction, turn synchronization off and on again. A green square alone does not confirm that time has been obtained from the network.

Finish and verify

Check the correct local time on the home screen. NTP requires access to a time server; connecting a phone to the controller in Access Point mode alone does not provide synchronization. A green square means the feature is enabled, not that the server has replied.

Other controller settingsController: language settings →Controller: device name →