GesslerEZF WIKIKNOWLEDGE HUB
PLDEEN

Export the event log

ON THE DISPLAY · STEP BY STEP

Export the event log

480 × 320 display screens in the selected language. The yellow outline marks where to tap. Illustrated data is for demonstration.

Display interface
Before you start

Connect a FAT32 or exFAT USB drive. Export may replace an existing logs.csv.

  1. EZF480 × 320 · Classic
    Step 1: Press MENU
    1Step 1 / 5

    Press MENU

    On the home screen, tap MENU in the upper right. If prompted for a PIN, sign in with an authorised account. Controller access codes →

  2. EZF480 × 320 · Classic
    Step 2: Open “Logs”
    2Step 2 / 5

    Open “Logs”

    On the first menu page, tap the Logs tile in the lower left.

  3. EZF480 × 320 · Classic
    Step 3: Tap the USB icon
    3Step 3 / 5

    Tap the USB icon

    In the event log, tap USB in the top bar.

  4. EZF480 × 320 · Classic
    Step 4: Confirm log export: OK
    4Step 4 / 5

    Confirm log export: OK

    Confirm exporting all logs using OK on the right.

  5. EZF480 × 320 · Classic
    Step 5: Check save confirmation
    5Step 5 / 5

    Check save confirmation

    This message confirms saving has finished. If an error or USB prompt appears instead, check the drive and retry. Do not remove the drive while saving.

Finish and verify

After save confirmation, copy logs.csv to a computer. Do not disconnect the drive during the operation.

Other USB walkthroughsExport luminaires to USB →Import luminaires from USB →Export test group assignments →Export a selected test report →