Change the controller radio power
- Open MENU. If asked for a PIN, enter your own administrator or service PIN and confirm with OK. Controller access codes →
- Tap the right arrow and choose Settings on the second page.
- On the first settings page, choose Radio in the lower right.
- Open Set Power in the upper left.
- Tap the required value: +3, +6, +9, +12, +14, +16, +18 or +20 dBm. Choose a higher value to increase transmit power or a lower value to reduce it. For example, +12 → +14 dBm increases power, while +14 → +12 dBm reduces it.
- Tap the disk icon in the upper left. The controller saves the value and applies it to its radio, then returns to the Radio menu.
- Reopen Set Power and check the highlighted level.
Unit and saving
The display shows transmit power in dBm. The available levels are fixed; there is no continuous adjustment in 1 dB steps. Finish the selection with the disk icon. The controller’s own radio power does not require an additional SEND SYNC.
