GesslerEZF WIKIKNOWLEDGE HUB
PLDEEN

Full backup to SD card

BACKUPS · STEP BY STEP

Full backup to SD card

480 × 320 display screens in the selected language. The yellow outline marks where to tap. Illustrated data is for demonstration.

Display interface
Before you start

Have your own administrator PIN ready. Make sure the SD card is correctly installed, working and has free space. Keep power connected and do not remove the card during the operation. Controller access codes →

  1. EZF480 × 320 · Classic
    Step 1: Open MENU
    1Step 1 / 10

    Open MENU

    On the home screen, tap MENU in the upper right. If the PIN window appears, sign in with your own administrator PIN and confirm with OK. Controller access codes →

  2. EZF480 × 320 · Classic
    Step 2: Open the second menu page
    2Step 2 / 10

    Open the second menu page

    Tap the right arrow in the top bar.

  3. EZF480 × 320 · Classic
    Step 3: Open “Settings”
    3Step 3 / 10

    Open “Settings”

    On the second menu page, choose Settings.

  4. EZF480 × 320 · Classic
    Step 4: Second settings page
    4Step 4 / 10

    Second settings page

    On the first settings page, tap the right arrow.

  5. EZF480 × 320 · Classic
    Step 5: Third settings page
    5Step 5 / 10

    Third settings page

    Tap the right arrow again.

  6. EZF480 × 320 · Classic
    Step 6: Fourth settings page
    6Step 6 / 10

    Fourth settings page

    Tap the right arrow once more. The next page contains Backups.

  7. EZF480 × 320 · Classic
    Step 7: Choose “Backups”
    7Step 7 / 10

    Choose “Backups”

    Tap the yellow-outlined Backups tile. Central backup opens with separate Save and Restore controls.

  8. EZF480 × 320 · Classic
    Step 8: Start saving to SD
    8Step 8 / 10

    Start saving to SD

    In the upper Save row, tap SD. This starts backup creation immediately; there is no disk-icon step or additional confirmation. The lower Restore row is for restoring data.

  9. EZF480 × 320 · Classic
    Step 9: Wait for the operation to finish
    9Step 9 / 10

    Wait for the operation to finish

    The SD backup is being prepared and saved. Watch the progress. Do not remove the SD card or disconnect power until completion.

  10. EZF480 × 320 · Classic
    Step 10: Check the final confirmation
    10Step 10 / 10

    Check the final confirmation

    Wait for 100% and “Full backup saved and verified”. The .ezb archive with the serial number and date is in /backups on the SD card. Starting the operation or seeing progress alone does not confirm a successful backup.

Finish and verify

Wait for 100% and “Full backup saved and verified”. The .ezb archive with the serial number and date is in /backups on the SD card. Starting the operation or seeing progress alone does not confirm a successful backup.

Other backup destinationsFull backup to USB →Full backup to Cloud — experimental →