GesslerEZF WIKIKNOWLEDGE HUB
PLDEEN

Switch the interface to Access Point

NETWORK AND EMAIL · STEP BY STEP

Switch the interface to Access Point

480 × 320 display screens in the selected language. The yellow outline marks where to tap. Illustrated data is for demonstration.

Display interface
Before you start

AP mode creates the controller’s local Wi‑Fi network. It does not itself provide Internet for cloud services or email alerts. Afterwards, connect the phone or computer to the controller’s network.

  1. EZF480 × 320 · Classic
    Step 1: Open MENU
    1Step 1 / 10

    Open MENU

    Tap MENU in the upper right. If the PIN keypad appears, enter your own code and confirm with OK. Use an account authorised to configure the controller. Controller access codes →

  2. EZF480 × 320 · Classic
    Step 2: Open the second menu page
    2Step 2 / 10

    Open the second menu page

    Tap the right arrow in the top bar.

  3. EZF480 × 320 · Classic
    Step 3: Open “Settings”
    3Step 3 / 10

    Open “Settings”

    Choose the Settings tile in the lower left.

  4. EZF480 × 320 · Classic
    Step 4: Open “Network”
    4Step 4 / 10

    Open “Network”

    Choose the middle tile with the network icon in the upper row.

  5. EZF480 × 320 · Classic
    Step 5: Open “Interface”
    5Step 5 / 10

    Open “Interface”

    Use the upper-left tile to choose the connection type. The other tiles depend on the active profile.

  6. EZF480 × 320 · Classic
    Step 6: Choose the right Access Point icon
    6Step 6 / 10

    Choose the right Access Point icon

    Tap the right access point icon. The controller will create its own Wi‑Fi network for local connections.

  7. EZF480 × 320 · Classic
    Step 7: Save the selected interface
    7Step 7 / 10

    Save the selected interface

    After selecting a mode, a floppy-disk icon appears in the upper left. Tap it. Selecting the mode alone does not save the change.

  8. EZF480 × 320 · Classic
    Step 8: Confirm saving and restart
    8Step 8 / 10

    Confirm saving and restart

    Confirm the save-changes question with OK on the right. The controller saves the profile and restarts. The previous network connection is disconnected.

  9. EZF480 × 320 · Classic
    Step 9: Open INFO after restart
    9Step 9 / 10

    Open INFO after restart

    Tap INFO in the upper left of the home screen.

  10. EZF480 × 320 · Classic
    Step 10: Read the controller AP connection details
    10Step 10 / 10

    Read the controller AP connection details

    After restart, return home and open INFO. In AP mode it shows SSID, PASS and the current IP address. Connect a phone or computer using your controller’s own details. The illustration contains demonstration data only.

Finish and verify

Read the actual IP address in INFO and use it for the local connection. AP credentials are device-specific; do not use the illustrated password. This display menu does not edit the AP SSID/password or AP DHCP/IP.

Other network and email guidesWi‑Fi client: select and scan networks →Switch from Wi‑Fi client to LAN →DHCP or static IP address →CLOUD email notifications: setup and test →