GesslerEZF WIKIKNOWLEDGE HUB
PLDEEN

DHCP or static IP address

NETWORK AND EMAIL · STEP BY STEP

DHCP or static IP address

480 × 320 display screens in the selected language. The yellow outline marks where to tap. Illustrated data is for demonstration.

Display interface
Before you start

Select LAN or Wi‑Fi client as the active interface. Have your network’s assigned IP, gateway and mask ready. 192.168.10.50 / 192.168.10.1 / 255.255.255.0 are examples only. The screens show LAN as an example; Wi‑Fi client uses the same fields.

  1. EZF480 × 320 · Classic
    Step 1: Open MENU
    1Step 1 / 13

    Open MENU

    Tap MENU in the upper right. If the PIN keypad appears, enter your own code and confirm with OK. Use an account authorised to configure the controller. Controller access codes →

  2. EZF480 × 320 · Classic
    Step 2: Open the second menu page
    2Step 2 / 13

    Open the second menu page

    Tap the right arrow in the top bar.

  3. EZF480 × 320 · Classic
    Step 3: Open “Settings”
    3Step 3 / 13

    Open “Settings”

    Choose the Settings tile in the lower left.

  4. EZF480 × 320 · Classic
    Step 4: Open “Network”
    4Step 4 / 13

    Open “Network”

    Choose the middle tile with the network icon in the upper row.

  5. EZF480 × 320 · Classic
    Step 5: Open “DHCP” for the active interface
    5Step 5 / 13

    Open “DHCP” for the active interface

    Select LAN or Wi‑Fi client first. In Network, tap the upper-middle DHCP tile. It is unavailable in AP mode.

  6. EZF480 × 320 · Classic
    Step 6: Turn DHCP off
    6Step 6 / 13

    Turn DHCP off

    A solid green box means DHCP is on. Tap it to switch to a static address. An empty box with a green outline means DHCP is off.

  7. EZF480 × 320 · Classic
    Step 7: Edit the IP address
    7Step 7 / 13

    Edit the IP address

    Tap the top IP address field. Use a free address assigned for your network.

  8. EZF480 × 320 · Classic
    Step 8: Enter the IP and confirm with OK
    8Step 8 / 13

    Enter the IP and confirm with OK

    Example: 192.168.10.50. Delete the old value with ←, enter four dot-separated numbers and press OK on the right. Each number must be between 0 and 255.

  9. EZF480 × 320 · Classic
    Step 9: Edit the gateway
    9Step 9 / 13

    Edit the gateway

    Tap the middle field with the gateway icon and enter your network gateway.

  10. EZF480 × 320 · Classic
    Step 10: Confirm the gateway address
    10Step 10 / 13

    Confirm the gateway address

    Example: 192.168.10.1. Enter the correct gateway and press OK.

  11. EZF480 × 320 · Classic
    Step 11: Edit the subnet mask
    11Step 11 / 13

    Edit the subnet mask

    Tap the bottom mask field. Do not enter the gateway or DNS server here.

  12. EZF480 × 320 · Classic
    Step 12: Confirm the subnet mask
    12Step 12 / 13

    Confirm the subnet mask

    Example: 255.255.255.0. Enter your subnet’s mask and press OK.

  13. EZF480 × 320 · Classic
    Step 13: Save addressing and restart
    13Step 13 / 13

    Save addressing and restart

    Check IP, gateway and mask. Tap the floppy-disk icon in the upper left. On this screen, saving restarts immediately without another OK question.

Finish and verify

After restart, check the new address in INFO and reconnect to it. To return to DHCP, reopen this screen, turn the DHCP box solid green and save with the floppy disk. The editor contains IP, gateway and mask, with no separate DNS field.

Other network and email guidesWi‑Fi client: select and scan networks →Switch from Wi‑Fi client to LAN →Switch the interface to Access Point →CLOUD email notifications: setup and test →