Find your answer.
Controller access codes
User and service functions, the default service PIN, daily Gessler PIN and changing the code on the classic display.
Planer — building projects, luminaire placement and AirBUS connectivity
Load floor plans, draw walls, select catalogue luminaires and estimate 868 MHz radio connectivity.
Standard and Gessler LED indication — reading luminaire faults
Distinguish the status LED from the main light. Function test, readout after complete power removal and an animated single-luminaire simulator.
Live Monitoring — controller, group and luminaire-list states
Live OFF and Live ON, communication faults and emergency counters. MENU settings and experimental group/list shortcuts, with Classic/METRO display steps.
Full backup to USB
Full controller backup to a USB drive: menu path, saving, progress and checking the .ezb file. A working SD card is also required for USB.
Full backup to SD card
Full controller backup to SD card: menu path, saving, progress and checking the archive in /backups.
Full backup to Cloud — experimental
Experimental feature: prepare a full backup on SD and upload it to Cloud. Functions may be incomplete; keep a checked USB or SD backup.
AirBUS — increase or reduce luminaire transmit power
MENU → Settings → Radio → In lumin. → dBm level → disk icon → Send SYNC. RSSI threshold explained, with a display image for each step.
Controller — set the clock, date and NTP
RTC clock: set time and date manually or use NTP synchronization, correction and Summer time mode. Separate procedures with display screens.
CLOUD email notifications — setup and test
Recipient, alarm conditions, reminders and reports after tests, with display screens and PIN login.
AirBUS — manually add a luminaire by address
MENU → Luminaires → Adding → Wireless → HEX address → OK, with display screens.
Export luminaires and transfer them to another controller
Transfer luminaire lists by channel and verify the imported configuration.
Export test group assignments
Export gruppetest.csv and check other settings separately.
Web Master — setting up the integration
Connect Web Master to an EZF controller, synchronise luminaires and read their status.
Modbus IP — configuration and status monitoring
Enable Modbus TCP, check the register map and test AirBus luminaires.
EZF API — JSON, TSV and error handling
HTTP request examples, luminaire IDs, NVG diagnostics and error codes.
Integration tools — Windows, macOS and simulators
Download the tester, practise locally and prepare the integration without firmware source code.
USB drives for the controller: FAT32 and exFAT
Prepare a USB drive, check format compatibility and resolve errors.
EZF. Safety starts with knowledge
A short opening film for the EZF control-unit knowledge hub.